top of page

2 x Double Sockets with Dual USB Charging Points

Are you tired of fighting for a socket to plug your phone or tablet into?

Are you using adapters to plug multiple items into 1 socket at the risk of overloading it?

Why not have Shrewsbury Electrical Services supply and install 2 Double Sockets with built in USB charging points as part of this Special Offer?

We will:

  • undertake the necessary testing to ensure the circuit on which the sockets are to be fitted is safe, including a check of the installation earthing arrangements.*

  • replace 2 existing double sockets (on the same circuit) with switched double sockets including dual USB charging points.

  • issue the relevant certification to ensure work is fully guaranteed.

* all for a price of just £55!

Book now to avoid disappointment!

Offer is subject to availability, see T's & C's below.

 

Screen Shot 2018-09-06 at 20.28.04.png
USB.jpg
Screen Shot 2018-08-01 at 12.00.38.png

* These checks should always be undertaken when replacing any accessory (socket / switch / light fitting), but are ignored by many electricians and nearly all DIY'ers. Without the testing and certification you do not have a valid guarantee.

Terms and Conditions: Offer subject to limited availability (maximum of 14 installations), only valid when booked in advance. Installation can only be undertaken if circuit / electrical installation meets minimum requirements on pre-install safety checks. If any faults are detected, no repair work will be undertaken, we will provide an estimate for the work required to bring the circuit / installation to required safety levels if requested, you will be under no obligation to retain our services for any of this work. Offer is for direct replacement of existing double sockets. Sockets to be replaced must be on single household circuit fitted in a minimum 25mm backbox. Price quoted is for white sockets similar to that in the picture above - other colours can be fitted at additional charge (contact us for details). Installation will require the circuit to be de-energised for a period, and power to the full installation will be switched off for short periods of time as part of the pre / post installation testing.

bottom of page